Electrical Panel Replacement: Signs You Need One and What Affects the Price

You likely need a new electrical panel if breakers trip often, the panel feels warm or smells like burning, you still have fuses, it’s an older brand like Federal Pacific or Zinsco, or you’re adding a large load like an EV charger or heat pump. Price depends mainly on amperage, meter and service updates, permits and code work.

Your electrical panel is the hub every circuit in your home runs through. When it’s worn out or too small for how you live now, the signs usually show up somewhere else first, like lights that dim when the air conditioner starts.

Here’s how to tell when it’s time for a replacement or upgrade, and what shapes the price.

Key takeaways

  • Frequent breaker trips, a warm or buzzing panel, a burning smell, fuses or a problem brand are the main signs it’s time.
  • Adding an EV charger, heat pump, hot tub or addition often needs more capacity than an older panel has.
  • A replacement keeps the same capacity. An upgrade, often from 100 to 200 amps, also involves the meter base and service wires.
  • Most replacements are finished in one day, with a permit and a city inspection.

What are the signs I need a new electrical panel?

  • Breakers trip often. Regular trips on the same circuits can mean the panel can’t keep up with demand. The National Fire Protection Association lists frequent tripping, warm outlets and flickering lights among the reasons to call an electrician.
  • Warmth, buzzing or a burning smell. Heat or sound from the panel points to loose connections or failing breakers. This needs attention right away.
  • Rust or corrosion. Moisture inside a panel damages breakers and connections.
  • Fuses instead of breakers. Fuse panels were common before the 1960s and usually can’t support modern loads.
  • Known problem brands. Federal Pacific Stab-Lok and Zinsco panels are widely recommended for replacement. Electrical distribution, lighting or power transfer equipment, which includes panels and wiring, was involved in 47 percent of U.S. home electrical fires from 2020 to 2024, according to the NFPA.
  • 60- or 100-amp service. Many older homes have service that’s too small for central air, electric heat and today’s appliances.
  • Lights dim when appliances start. A sign the panel or service is near its limit.
  • You’re adding a big load. An EV charger, heat pump, hot tub or addition often needs more capacity.

Panel replacement vs panel upgrade: what’s the difference?

A replacement swaps your existing panel for a new one at the same capacity, often because the old one is worn or a problem brand. An upgrade, sometimes called a service upgrade, increases your home’s capacity, most commonly from 100 amps to 200 amps. An upgrade usually involves the meter base and the service wires from the utility as well as the panel.

What affects the price of an electrical panel replacement?

Every panel job is quoted individually after a look at your home. These factors move the price most:

  • Amperage. A 200-amp upgrade involves more than a same-size replacement.
  • Meter base and service entrance. Whether the utility connection and meter base need replacing too.
  • Panel location. Moving a panel, or relocating one out of a bathroom or closet to meet code, adds work.
  • Code updates. New panels often need updated grounding and bonding, and some circuits may need AFCI or GFCI protection.
  • Permits and utility coordination. Most cities require a permit and inspection, and the utility has to disconnect and reconnect service.

We quote by the job, not the hour, which means no hidden fees. You’ll know the final price before any work begins.

What happens on the day of a panel replacement?

  • Power off. The utility disconnects service, or the electrician shuts off the main, for most of the day.
  • Swap and reconnect. The old panel comes out, the new one goes in, and each circuit is reconnected and labeled.
  • Inspection. A city inspector checks the work, then power is restored.

Most replacements are completed in a single day.

What you can safely check yourself

Open the panel’s outer door and check the label for the brand and the main breaker’s amperage. Look for rust, scorch marks or labels that don’t match the rooms. Don’t remove the inner cover, which exposes live parts.

When to call a licensed electrician

Call a licensed electrician if your panel is warm, buzzing or smells like burning, if breakers trip regularly, or before adding an EV charger, heat pump or other large appliance. A panel that’s hot to the touch or shows scorching is an emergency. Our team answers your call 24/7.

Frequently asked questions

How long do electrical panels last?

There’s no fixed lifespan. Heat, moisture, overloading and the panel’s brand matter as much as age, so have any panel more than a few decades old inspected.

Do I need a 200-amp panel?

Most homes with central air, an electric range, a dryer and plans for an EV charger or heat pump are better served by 200 amps. A load calculation by a licensed electrician tells you for certain.

Can I replace an electrical panel myself?

No. Panel work involves the service connection, requires a permit in most Missouri cities and must be inspected. It should be done by a licensed electrician.

Will a new panel lower my electric bill?

Not directly. A new panel doesn’t use less power, but it can make it safe to add efficient equipment like a heat pump and reduce nuisance trips.

Sources

Talk to your local Mr. Electric team

Mr. Electric® of Missouri is locally owned and operated, with licensed service professionals in three territories. We quote by the job, not the hour, which means no hidden fees, and our team answers your call 24/7, so you never have to face an electrical emergency alone. We’ve been BBB A+ accredited since 2013, and our work is backed by the Neighborly Done Right Promise®.

Learn more about our electrical panel replacement and upgrades, or request an appointment online.

Last reviewed November 2026 by the Mr. Electric of Missouri team.