Federal Pacific Electric (FPE) panels with Stab-Lok breakers were common in American homes from the 1950s through the 1980s. The concern is that some of their breakers may fail to trip during an overload, which is a breaker’s main job. Home inspectors and many insurers flag them, and most electricians recommend replacing the panel rather than individual breakers.
If a home inspector wrote “Federal Pacific panel” or “FPE Stab-Lok” in your report, you’re not alone. These panels were common in homes built across Springfield, Columbia, Jefferson City and Joplin during those decades.
Here’s how to tell whether you have one, why it matters and what your options are.
Key takeaways
- Federal Pacific Electric (FPE) panels with Stab-Lok breakers were installed in homes from roughly the 1950s to the 1980s.
- The concern is breakers that may not trip during an overload, which is the one job a breaker has.
- The Consumer Product Safety Commission closed its investigation in 1983 without a recall, but inspectors and insurers still flag these panels.
- Most electricians recommend replacing the whole panel rather than swapping individual breakers.
How do I know if I have a Federal Pacific panel?
- The label. Look on the panel door or inside the cover for “Federal Pacific Electric,” “FPE” or “Federal Electric.”
- “Stab-Lok”. The name is usually printed on the panel’s label or interior.
- The breakers. Stab-Lok breakers are often thin, with red-tipped or colored handles.
- The age of the home. Homes built or remodeled between the 1950s and 1980s are the most likely to have one.
Why are Federal Pacific panels considered a problem?
A circuit breaker has one job: switch off when a circuit draws too much current, before the wiring overheats. The concern with Stab-Lok breakers, and the reason federal regulators investigated them, is that some may not trip under overload or short circuit conditions.
- Breakers that may not trip. If a breaker stays on during an overload, wiring can overheat inside the walls.
- Loose connections. Some Stab-Lok breakers don’t seat firmly on the panel’s bus bar, which can cause arcing and heat.
- Age. Even the newest of these panels are now about 40 years old.
- No current replacement standard. Replacement breakers exist, but they don’t change the panel’s design.
The U.S. Consumer Product Safety Commission investigated FPE breakers in the early 1980s and closed its investigation in 1983 without a recall, citing limited data. That’s why you’ll find different opinions online. Most electricians and home inspectors still treat these panels as a known risk.
From 2020 to 2024, U.S. fire departments responded to an estimated 46,652 home fires a year involving electrical failures or electrical equipment, causing an average of 527 deaths and $2.4 billion in direct property damage each year, according to the National Fire Protection Association.
Will insurance cover a home with a Federal Pacific panel?
Some insurers won’t write or renew a policy on a home with an FPE panel. Others ask for an electrician’s inspection or a replacement within a set time. If you’re buying a home, ask your insurance agent before closing.
What are my options?
- Replace the panel. This is the option most electricians recommend. A new panel with modern breakers removes the concern entirely and gives you room for future loads.
- Have it inspected. If replacement isn’t possible right away, a licensed electrician can check the panel for heat damage, loose breakers and overloaded circuits. Here’s more on the signs of a faulty electrical panel.
- Don’t swap breakers yourself. Pulling or replacing breakers in a live panel is dangerous and doesn’t fix the panel’s design.
What affects the cost of replacing a panel is mostly its amperage, whether the meter and service wires need updating, and how much of the home’s wiring has to be brought up to code. We’ll give you a written price before any work begins.
What you can safely check yourself
You can open the outer panel door and read the label. Look for heat discoloration, rust or a burning smell. Don’t remove the inner cover, and don’t pull or reset breakers that look damaged.
When to call a licensed electrician
Call a licensed electrician if you’ve identified an FPE or Stab-Lok panel, if a home inspection or insurer has flagged it, or if the panel feels warm, buzzes or smells like burning. If you see scorching or smell burning, leave the panel alone and call us. Our team answers 24/7.
Frequently asked questions
Are Federal Pacific panels illegal?
No. They aren’t illegal to have, and there was no recall. But they no longer meet the expectations of many inspectors and insurers, and replacement is widely recommended.
Can I sell a house with a Federal Pacific panel?
Yes, but buyers’ inspectors almost always flag it, and buyers may ask for a replacement or a credit. Replacing it before listing can prevent delays.
How long does it take to replace a Federal Pacific panel?
Most panel replacements are completed in a day, with a short power interruption. Permits and the utility’s schedule can add time.
Are Zinsco panels a similar concern?
Yes. Zinsco panels from the same era have a separate set of known issues, and electricians often recommend replacing them too.
Related guides
- Signs you need a new electrical panel
- Why does my breaker keep tripping?
- Knob and tube wiring in older Missouri homes
Sources
- U.S. Consumer Product Safety Commission, Commission Closes Investigation of FPE Circuit Breakers (1983)
- National Fire Protection Association, Home Fires Caused by Electrical Failure or Malfunction
- National Fire Protection Association, Electrical Safety in the Home
Talk to your local Mr. Electric team
Mr. Electric® of Missouri is locally owned and operated, with licensed service professionals in three territories. We quote by the job, not the hour, which means no hidden fees, and our team answers your call 24/7, so you never have to face an electrical emergency alone. We’ve been BBB A+ accredited since 2013, and our work is backed by the Neighborly Done Right Promise®.
- Springfield and Southwest Missouri: 417-208-9857
- Columbia, Jefferson City and Central Missouri: 573-618-5465
- Joplin and Jasper County: 417-585-0030
Learn more about our electrical panel replacement, or request an appointment online.
Last reviewed November 2026 by the Mr. Electric of Missouri team.