A whole house generator is a permanently installed standby generator that runs on natural gas or propane and starts automatically when the power goes out. Installation involves sizing the generator to your home’s load, setting it on a pad outside, connecting fuel, and wiring an automatic transfer switch. It usually needs electrical and fuel permits.
Missouri winters bring ice storms that can leave neighborhoods without power for days, and spring brings severe storms. Nationally, customers averaged 11 hours without power in 2024, and major events like storms caused nearly nine of those hours, according to the U.S. Energy Information Administration. A standby generator keeps your heat, sump pump, refrigerator and lights on without anyone having to drag a portable generator out in the cold.
Here’s what goes into choosing and installing one, and what shapes the final price.
Key takeaways
- A standby generator starts on its own and moves your home onto generator power through an automatic transfer switch, usually within seconds.
- Size it from a load calculation of what you need to run, not from the square footage of the house.
- Natural gas is simplest where there’s a gas meter. Propane suits rural homes with a large enough tank.
- The install itself takes one to three days, but equipment, permits and utility coordination take longer, so plan in the fall.
How does a whole house generator work?
A standby generator sits outside on a pad and connects to your home’s fuel supply and electrical panel. An automatic transfer switch (ATS) watches the utility power. When it drops, the ATS starts the generator and moves your circuits over, usually within seconds. When utility power returns, it switches back and the generator shuts itself off.
What size generator does my house need?
Generators are sized in kilowatts (kW). The right size depends on what you want to run, not just the square footage of the home.
- Essential circuits. Furnace blower, refrigerator, sump or well pump, some lights and outlets. A smaller generator can cover these.
- Whole home. Everything, including central air, an electric range or a heat pump. This needs a larger unit and careful load management.
- Start-up surge. Air conditioners and well pumps draw much more power for a moment when they start. The generator has to handle that surge, not just the running load.
- Load calculation. A licensed electrician reviews your panel and appliances to recommend a size, rather than guessing from the house size.
Natural gas or propane?
- Natural gas is the simplest if your home already has a gas meter. The utility may need to confirm the meter can supply the generator alongside your furnace and water heater.
- Propane is common in rural Missouri. It needs a tank sized for how long you want to run during an outage. Many homes with propane heat can connect to the existing tank if it’s large enough.
Where can a standby generator be placed?
Placement follows the manufacturer’s clearances and local code. Generators need distance from windows, doors, vents and other openings so exhaust can’t get inside (Ready.gov warns that generator exhaust carries carbon monoxide, a colorless, odorless gas), plus space around the unit for airflow and service. The best spot is usually close to the gas meter and the electrical panel, which keeps fuel and wiring runs short.
What affects the cost of installing a whole house generator?
Every installation is quoted individually. These are the factors that move the price most:
- Generator size. Larger kW units cost more and may need larger fuel lines.
- Transfer switch type. A whole-home transfer switch or load-management modules for central air and other large appliances.
- Fuel connection. Distance to the gas meter, whether the meter needs upgrading, or whether a new propane tank is needed.
- Panel condition. Older or undersized panels may need an upgrade first.
- Site work. The pad, trenching and how far the generator sits from the house.
- Permits and inspection. Required by most Missouri cities for both electrical and fuel work.
We quote by the job, not the hour, which means no hidden fees. You’ll know the final price before any work begins.
How long does installation take?
The installation itself usually takes one to three days once the generator and permits are in hand. The longer part is often the lead time for equipment, permits and utility coordination, which is why we recommend planning before winter storm season rather than after the first outage.
What you can do before your consultation
- List what you need to keep running during an outage: heat, sump pump, well pump, refrigerator, medical equipment, home office.
- Find your gas meter or propane tank and your electrical panel, and note how far apart they are.
- Take a photo of your panel’s label showing the brand and amperage.
- Check whether your HOA or city has rules about where equipment can sit.
When to call a licensed electrician
Standby generator installation involves gas lines, your main panel and an automatic transfer switch, so it should always be handled by licensed professionals with permits. Book a consultation in the fall so your generator is in place before the January ice storms.
Frequently asked questions
Is a whole house generator worth it in Missouri?
For homes that lose power during ice storms or severe weather, rely on a sump or well pump, or have someone who depends on medical equipment, a standby generator provides heat, water and peace of mind without anyone having to set up a portable generator.
How long can a whole house generator run?
On natural gas, it can run as long as the gas supply holds, with periodic maintenance checks during long outages. On propane, run time depends on the tank size and how much load the generator carries.
Do whole house generators need maintenance?
Yes. Most run a short self-test weekly and need annual service, including oil, filters and a battery check, to stay ready. See our generator maintenance tips.
Do I need a permit for a standby generator?
Most Missouri cities require electrical permits, and fuel connections usually need their own permit or inspection. Your installer should pull them.
Related guides
Sources
- U.S. Energy Information Administration, Hurricanes in 2024 led to the most hours without power in the United States in 10 years
- Ready.gov (FEMA), Power Outages
Talk to your local Mr. Electric team
Mr. Electric® of Missouri is locally owned and operated, with licensed service professionals in three territories. We quote by the job, not the hour, which means no hidden fees, and our team answers your call 24/7, so you never have to face an electrical emergency alone. We’ve been BBB A+ accredited since 2013, and our work is backed by the Neighborly Done Right Promise®.
- Springfield and Southwest Missouri: 417-208-9857
- Columbia, Jefferson City and Central Missouri: 573-618-5465
- Joplin and Jasper County: 417-585-0030
Learn more about our electrical services, or request an appointment online.
Last reviewed November 2026 by the Mr. Electric of Missouri team.