A generator interlock kit is a metal plate on your existing panel that makes it impossible to turn on the main breaker and the generator breaker at the same time. A transfer switch is a separate switch that moves selected circuits, or the whole house, from utility power to generator power. Interlocks suit portable generators; standby generators need an automatic transfer switch.
Winter ice storms, spring tornadoes and summer thunderstorms all knock out power across Missouri. U.S. electricity customers averaged 11 hours without power in 2024, nearly twice the yearly average of the decade before, according to the U.S. Energy Information Administration. A generator keeps the furnace, sump pump and refrigerator running, but only if it’s connected safely.
There are two code-approved ways to connect a generator to your home’s wiring: an interlock kit or a transfer switch. Here’s how each one works and how to choose.
Key takeaways
- Never plug a generator into a wall outlet. That backfeeding can electrocute utility line workers and start a fire.
- An interlock kit is the simplest code-recognized option for a portable generator, as long as a kit is listed for your exact panel.
- A transfer switch works with any panel. Standby generators use an automatic transfer switch, so nobody has to be home.
- Either one means working inside your panel, so it needs a licensed electrician and, in most Missouri cities, a permit.
Why can’t I just plug my generator into an outlet?
The Consumer Product Safety Commission warns never to power house wiring by plugging a generator into a wall outlet, a practice known as backfeeding. Using a double-ended cord sends power backward through your panel and out onto the utility lines. It can electrocute line workers restoring power down the street, damage your home’s wiring and start a fire. It also violates electrical code and utility rules.
Both an interlock kit and a transfer switch exist to prevent exactly that. They make sure your home is disconnected from the utility before generator power can flow in.
How does a generator interlock kit work?
An interlock kit is a sliding plate mounted on your panel cover. When the main breaker is on, the plate blocks the generator breaker. To switch to generator power, you turn the main off, slide the plate, and turn the generator breaker on.
- Uses your existing panel. No separate switch box. An inlet box is installed outside so the generator cord plugs into the house.
- You choose the circuits. During an outage you turn on only the breakers your generator can handle.
- Manual. Someone has to be home to start the generator and switch over.
- Panel-specific. The kit has to be listed for your exact panel brand and model.
How does a transfer switch work?
A transfer switch is a separate device wired between the utility, your generator and your panel. It moves the connected circuits from one power source to the other.
- Manual transfer switch. Wired to a set of pre-selected circuits. You flip each one to generator power during an outage.
- Automatic transfer switch (ATS). Senses an outage, starts a standby generator and switches the house over in seconds, then switches back when utility power returns. Nobody needs to be home.
- Required for standby generators. A permanently installed natural gas or propane generator uses an ATS.
Interlock kit vs transfer switch: side by side
| Interlock kit | Manual transfer switch | Automatic transfer switch | |
|---|---|---|---|
| Best for | Portable generators | Portable generators | Standby generators |
| Switching | By hand at the panel | By hand at the switch | Automatic |
| Circuits you can power | Any breaker in the panel | Pre-selected circuits only | Selected circuits or whole house |
| Someone needs to be home | Yes | Yes | No |
| Fits any panel | Only panels with a listed kit | Yes | Yes |
| Permit usually required | Yes | Yes | Yes |
Which one should I choose?
- Choose an interlock kit if you already own a portable generator, your panel has a listed kit, and you’re comfortable switching breakers during an outage.
- Choose a manual transfer switch if your panel doesn’t have a listed interlock kit, or you’d rather have a short list of pre-wired circuits to flip.
- Choose an automatic transfer switch with a standby generator if outages happen when you’re away, someone in the home relies on medical equipment, or you have a sump pump or well pump that can’t be without power.
What you can safely check yourself
You can look at your panel’s label to find its brand and model, which tells an electrician whether an interlock kit is available. Check your portable generator’s rated wattage and the plug type on its control panel. Never open the panel’s inner cover.
Always run portable generators outdoors, well away from windows, doors and vents. Ready.gov recommends keeping generators at least 20 feet from windows, doors and attached garages, with a working carbon monoxide alarm on every level of the home. Our backup generator safety tips cover the rest.
When to call a licensed electrician
Installing an interlock kit, inlet box or transfer switch means working inside your panel. That should always be done by a licensed electrician with a permit, so the connection is inspected and your insurer has a record of it. Call us before storm season so it’s ready when you need it.
Frequently asked questions
Is a generator interlock kit legal in Missouri?
Yes, when the kit is listed for your panel and installed by a licensed electrician with a permit where your city requires one. It’s a code-recognized way to prevent backfeeding.
Can I install a generator interlock kit myself?
We don’t recommend it. It requires working inside a live panel, adding a breaker and an inlet box, and in most Missouri cities, a permit and inspection.
What size generator do I need for an interlock kit?
It depends on what you want to run. A load review of your furnace, refrigerator, sump or well pump and lights tells you the wattage you need. Our guide to portable generator power requirements walks through the math. Your electrician can help you size it.
Do I need a transfer switch for a whole house generator?
Yes. A permanently installed standby generator uses an automatic transfer switch so it can take over the moment the power goes out.
Related guides
Sources
- U.S. Consumer Product Safety Commission, Portable Generators
- U.S. Energy Information Administration, Hurricanes in 2024 led to the most hours without power in the United States in 10 years
- Ready.gov (FEMA), Power Outages
Talk to your local Mr. Electric team
Mr. Electric® of Missouri is locally owned and operated, with licensed service professionals in three territories. We quote by the job, not the hour, which means no hidden fees, and our team answers your call 24/7, so you never have to face an electrical emergency alone. We’ve been BBB A+ accredited since 2013, and our work is backed by the Neighborly Done Right Promise®.
- Springfield and Southwest Missouri: 417-208-9857
- Columbia, Jefferson City and Central Missouri: 573-618-5465
- Joplin and Jasper County: 417-585-0030
Learn more about our electrical services, or request an appointment online.
Last reviewed November 2026 by the Mr. Electric of Missouri team.